How To Build Solar Water Heater
Many of us, in fact everyone of us are finding ways to save our hard earned money and at the same time to be eco-friendly in this testing times of soaring electricity and oil prices. So before it is too late, you should learn how to build solar water heater. There are galore of advantages of solar water heater and if you have one, you do not have to depend on the gas and electricity to run hot water baths. No doubt, heating was never so easy and economic before the inception of solar water heaters.
There is no dearth of commercial ready to use solar water heaters in the market, but then it could cost anywhere around $2000. So why spend so much when you have the option to build solar water heater at your own place at a much cheaper and affordable price.
Materials required
Not much of the materials are required for building a solar water heater. You just need to have a strong box; aluminum type window panels, copper pipes, storage tank and that will be all.
Steps to build a solar water heater
• Cover the box with the glass panels; this will serve like a solar panel for your solar water heater.
• Once the water heating box with glass covering has been created, it is now time for the installation of the copper pipes.
• Cut and solder the copper pipes and, fasten them to both the bottom and top pipe lines, but do not forget interior pipes should be there inside the box.
• Now place a storage tank, painted black, above the solar heat absorbing panel.
• Connect or hook the outlet of the copper pipes to the tank.
As the principle goes, hot water will rise up towards the storage tank and at the same time the cold water will go down.
General Precautions
• If you are thinking of using a used tank, then make sure that it is leak-proof and is in a better condition.
• Do not use CVC pipes inside the box as they won’t be able to sustain the extremes of temperature.
• Use polyisocyanurate insulation board instead of polystyrene insulation board.
By: Ashish Arora
For more comprehensive details and information on how to build solar water heater, you can log on to simpleheaters
There is no dearth of commercial ready to use solar water heaters in the market, but then it could cost anywhere around $2000. So why spend so much when you have the option to build solar water heater at your own place at a much cheaper and affordable price.
Materials required
Not much of the materials are required for building a solar water heater. You just need to have a strong box; aluminum type window panels, copper pipes, storage tank and that will be all.
Steps to build a solar water heater
• Cover the box with the glass panels; this will serve like a solar panel for your solar water heater.
• Once the water heating box with glass covering has been created, it is now time for the installation of the copper pipes.
• Cut and solder the copper pipes and, fasten them to both the bottom and top pipe lines, but do not forget interior pipes should be there inside the box.
• Now place a storage tank, painted black, above the solar heat absorbing panel.
• Connect or hook the outlet of the copper pipes to the tank.
As the principle goes, hot water will rise up towards the storage tank and at the same time the cold water will go down.
General Precautions
• If you are thinking of using a used tank, then make sure that it is leak-proof and is in a better condition.
• Do not use CVC pipes inside the box as they won’t be able to sustain the extremes of temperature.
• Use polyisocyanurate insulation board instead of polystyrene insulation board.
By: Ashish Arora
For more comprehensive details and information on how to build solar water heater, you can log on to simpleheaters
posted by Hugh Harris-Evans at 1:13 AM
0 Comments:
Post a Comment
<< Home